first commit

Content/Method.tex

@@ -0,0 +1,78 @@
+\chapter{Method}
+\label{chap:Methode}
+
+methosjfsdhfkjsahfdkjsa
+
+\section{Modelation of Corrosion Mechanism}
+\label{sec:Anlagenbeschreibung}
+
+\section{Material Characterization of Substrate}
+
+\subsection{Potentiostatic  Measurements}
+
+\subsection{Potentiodynamic  Measurements}
+
+\section{Experimental Setup of Endurance Run}
+
+
+\subsection{Testbench}
+
+\subsection{Characterization of Cells}
+
+Polkurves 60,80,90
+vorher nachher
+vrgl. versch temp.
+
+\subsection{pH Measurement}
+
+\begin{table}[h]
+	\centering
+	\begin{tabular}{ccccccc} 
+		\hline
+		T$_{coolant,in}$ & T$_{gas,A}$ & T$_{dp,A}$ &p$_{out,A}$ &T$_{gas,C}$ & T$_{dp,C}$& p$_{out,C}$\\
+		\hline
+	60&	75 & 37& 2&75 &46& 2\\
+	75& 90 & 49& 2&90 & 59& 2\\
+	90& 105 & 62& 2&105& 73& 2\\
+
+	\end{tabular}
+	\caption{Temperatures of the cell}
+	\label{tab:3_pH_T}
+\end{table}
+%dividing this into Temperature and pressure?
+
+
+
+
+
+\subsection{Development of Endurance Run}
+
+\subsection{Characterization of the Endurance Run}
+
+Polkurves 60,80
+vorher nachher
+vrgl. versch temp.
+
+\begin{table}[h]
+	\centering
+	\begin{tabular}{ccccccc} 
+		\hline
+		T$_{coolant,in}$ & T$_{gas,A}$ & T$_{dp,A}$ &p$_{out,A}$ &T$_{gas,C}$ & T$_{dp,C}$& p$_{out,C}$\\
+		\hline
+		65&	85 & 45& 2,3&85 &53& 1,4\\
+	\end{tabular}
+	\caption{Temperatures of the cell}
+	\label{tab:3_ER}
+\end{table}
+
+pt  agglomeration 		6	
+
+\section{Ex-Situ analysis}
+
+\subsection{Laser Induced Breakdown Spectroscopy(LIBS)}
+
+\subsection{Energy Dispersive X-Ray Spectroscopy (EDX)}
+
+\subsection{Scanning Electrone Microscope (SEM)}
+
+\subsection{Inductively Coupled Plasma  Spectroscopy (ICP)}